Súng xịt khí - Daisen DG-10K-ARS Air Gun Hammer Duster

Súng xịt khí - Daisen DG-10K-ARS Air Gun Hammer Duster
Mã sản phẩm DG-10K-ARS
Danh mục ĐẦU NỐI KHÍ NÉN DAISEN - NHẬT BẢN
Thương hiệu DAISEN SP
Xuất xứ Nhật Bản
Tồn kho Hết hàng
Giá Liên hệ
CÔNG TY TNHH KURA VIỆT NAM
Hà Nội:
+ 58 Tố Hữu, Nam Từ Liêm, Hà Nội, VN
+ 275 Nguyễn Trãi, Thanh Xuân, Hà Nội
Hồ Chí Minh:
+ Đường D2, Hiệp Bình Phước, Thủ Đức, Hồ Chí Minh

091.228.65.66 - 091.336.0223 - 083.813.4442
[email protected]
Quý khách hàng mua số lượng lớn vui lòng liên hệ để nhận giá tốt nhất

 

Daisen has been a professional manufacturer to manufacture quick fluid fittings (coupling) for air.

We aim to provide easy-to-use tension for workers, improving work efficiency and reducing fatigue for the worker.

Reduces the burden on the product that eliminates twists and folds of the hose, allowing you to use the product for a long time.

 

Storm does not need to shake the duster side to side during blowing.

The groove is designed to drive water and dust into the groove to provide efficient support for the job.

Effective for draining water, removing dust, draining grease, etc.

Wider coverage for reduced blow time

When used with the same pressure and concurrent rate, the intermittent wave effect can be used for a wide range of processes.

Saves time and energy saving thanks to the no-shake blows.

We recommend that the distance between the target objects is within 3.1 inches (80 mm).

Powerful support for airblow work with intermittent waves.

With a wide range of wind and a non-swinging blow that can be used to save time and save energy.

Working pressure (note 1): 0.4 - 0.8 MPa

Operating Temperature (Note 2): 12°F - 140°F (5°C - 60°C).

(Note 1)

Pressure is not pressure when air is stopped, it is the pressure during use.When used with an air gun or when connected directly to a fixed pipe, the pressure of the air gun is different, because there is a pressure loss in the air gun.

(Note 2)

The operating temperature is both ambient and fluid temperature. Especially when spraying high pressure gases, the temperature of the compressor or or tank will drop down at about 42°F (5°C) to 10°C), so be careful not to let the liquid temperature below 22°F (10°C).